Saturday, January 22, 2011

postheadericon Love Bug Pickups are ready...

Check in the Always list pick up section to see where you need to pick them up. Hope you enjoy them <3
Friday, January 21, 2011

postheadericon Love Bug


This tut was written in Photoshop CS5. Any version will work. I assume that you have a working knowledge of PS while using my tuts. Please keep in mind that some keyboard short cuts may be different in other versions.
Supplies Needed:
FTU(for now) You & Me
by Bellisae Designs. You can get the kit HERE
Template:
Be my Love Bug 
by Kristen at Toxic Desirez

Tube of choice:
I am using artwork of Keith Garvey. 
You must have a license to use his work. 
You can purchase it at Mypsptubes

Font:
Heartland Regular
Lainie Day SH(optional)
Plug-ins Needed:
Xero - Fritillary
Tramages - Tow the line
Penta.com - Jeans
~Lets get started~

Open up template and turn off the credits layer.
From the kit open up El21. 
Move to canvas and place just above the background layer.
Scale to about 33% and position so that none looks cut off. Some may be over the edge but I felt that that size showed up best.
Open El10 and move to canvas.
Right click the window layer and do select pixels.
EDIT>> FILL ... On the drop down menu click color. Choose a color from template.
SELECT>> DESELECT
Scale to about 26.69%. Dont click the check mark to be done yet. Just move it over to the left of the rectangle so that it shows just over it. Now take the right middle side of the scale box and drag it out so that it just comes out over the right side.
It should look something like this..
Now you may click the check mark.
Be sure this layer is under the El21 layer.
Open up tube of choice. If using the same as me, use the full body and scale to about 89.15%
Move to right side of temp. Be sure this layer is under the wordart layer. Position the tube so that the arrow in her hand is down farther on the letter U of the wordart.
About something like this...(ignore the black splatter we will get to that later)
Now duplicate the tube and do FILTER>> BLUR>> GAUSSIAN BLUR set at 2.0
Change the layer styler on the duplicated blurred layer to soft light.
Merge it down onto the original tube layer and duplicate once again. Move the top one above the wordart layer.
Get your eraser tool and erase everything that covers the word art except the arrow.
It should now look like this...(ignore the black splatter we will get to that later)
Open the close up part of the tube and move to canvas. 
Do EDIT>>TRANSFORM>> HORIZONTAL FLIP
Move this tube layer just above the big pink circle layer. Position to liking.
Duplicate this tube and add you Gaussian blur just as we did earlier. Then change the layer style once again to soft light and merge down.
Move this layer now under the big pink circle layer.
CTRL + click on the preview window of the big pink circle layer.
CTRL + SHIFT + I (letter eye)
Highlight the tube layer and CTRL + X
Move that tube layer back on top of the circle layer.
Now open El33. Move to canvas and scale to about 19.98%. The do free transform to your liking. 
Position on top of big pink circle layer and tube but move to the right so it is under the full body tube.
On the big pink circle add Xero>>Fritillary Settings at 5, 30, 10, 0
Also add Tramages>>Tow the line settings at 80, 54, 48, 9
Open EL13 and move to canvas. Scale to about 14.31% and rotate about -9.52 degrees.
Move the large heart and raster5 layers under the EL13 layer.
Move the small pink circle and frame to the right by the tubes butt and foot.
Add pent.com>>Jeans  Settings 94, 2, 2 to the small pink circle.
Open El 28 and move to canvas. Scale to about 15.45%. Move on top of small circle frame.
Open El 13 and move to canvas. Scale to about 15.31% and rotate a bit to your liking.
Position under full body tube to the right.
Open the feather element and scale to 17.44% Position under the lady bug and small hearts.
Open the black and white swirly frame and scale to about 13.55%. Do exactly how we did with the red splatter(El10) earlier.
Add any drop shadow to your pain parts of them temp, the full body tube and any elements.
Add Outer glow to your wordart. Settings at this..
Add your name plus the cursive text(optional to add second text)
Add you copyright info. and license number.
Hope you have enjoyed this tut!
Tuesday, January 18, 2011

postheadericon Blueatiful Time

~Blueautiful Time~
 
This tut was written in Photoshop CS5. Any version will work. I assume that you have a working knowledge of PS while using my tuts. Please keep in mind that some keyboard short cuts may be different in other versions.
Supplies Needed:
 PTU So blue kit
you can purchase this kit

Template:
I am using Temp #161 by Kristin

Tube of choice:
 I am using the art of Zindy S. D. Nielsen
You can purchase her tubes and license at Zindy Zone Shop 
close ups are best and one full body.
Font:
MeaCulpa
Plug-ins Needed:
None

~Lets get started~
Open template. Turn the eyes off or delete the credits, pixel words, glitter stars and skull layers.
Open wd_sb_pp3 paper. Scale to just fit over the whole canvas. Move this layer below the star background layer.
Hold CTRL key and click on the preview window of the star background layer.
CTRL + SHIFT + I (letter eye)
Highlight the paper layer and do CTRL + X
Turn the eye off the pink star background layer or delete it.
Highlight the left circle layer.
Open wd_sb_pp6 paper. Move to canvas and scale to just fit over that left circle.
Move pp6 paper under the left circle layer.
Hold CTRL key and click on the preview window of the left circle layer.
CTRL + SHIFT + I (letter eye)
Highlight the pp6 layer and do CTRL + X
Turn the eye off the left pink circle layer or delete it.
Duplicate the pp6 circle layer and move it over to the right pink circle. Use your keyboard up and down keys to be more precise on getting it center just over the pink circle.
When done moving it into place, you may now turn the eye off or delete the right pink circle.
Open wd_sb_pp7 and move it to your canvas. Scale to just fit over the pink rectangle layer.
Move pp7 layer below the pink rectangle layer.
Hold your CTRL key and click on the preview window of the pink rectangle layer.
CTRL + SHIFT + I (letter eye)
Highlight the pp7 layer and do CTRL + X
Turn the eye off or delete the pink rectangle layer.
Highlight the oval layer.
Go to IMAGE >> ADJUSTMENTS>> HUE AND SATURATION
Change the HUE to - 131 and the lightness to - 43
Highlight the Oval glitter layer and change the hue and saturation to your liking. 
Open wd_sb_pp11 and move to canvas.
Scale to just fit over the pink circle 2
Do the same as we have been doing above to put the paper in the circle.
Turn the eye off or delete the pink circle 2 layer.
Highlight the glitter circle and change the hue and saturation to your liking. 
Highlight the pink circle 1 layer.
Go to hue and saturation again and change the hue to - 94 and lightness to - 39
Now on to some elements...
Open wd_sb_el14 and move to canvas
Scale to about 14.73% and move this layer above the stripped circle paper layer.
Position that to your liking. 
Open wd_sb_el24 and move to canvas.
Scale to about 18.17% and rotate 7.63 degrees.
Duplicate and move one of them under the circle 1layer.
Highlight the top one and erase the bottom part of the umbrella so that it looks like it is hanging off the circles. You should have something that looks like this...
NOTE: I wound up erasing the handle after doing the ex so feel free to do so or leave like this. It is up to you how you want it to look. 
 
Open wd_sb_el9 and move to canvas.
Scale to liking and position under the top umbrella layer.
Open wd_sb_el11and move to canvas.
Scale to about 25.03% or to liking and move on top of the blue rectangle paper layer.
Position in to the top left.
Duplicate, flip horizontal and then vertical. Move to the right bottom of the blue rectangle paper. 
Open tube of choice. (close up is best) Move to canvas.
Position this layer above the stripped blue circle but below the umbrella and the el9 layers.
If you are using the same tube as me, you will notice that the tube is a bit smaller than the circle at the top and bottom. No worries. We will worry about that later.
Move tube to your liking and position inside strip circle as we did above with all the other papers.
Duplicate this tube layer and go to FILTER>> BLUR>> GAUSSIAN BLUR set at 2.0 
Change the layer styler on the duplicated blurred layer to Soft light.
Change the original tube layer style to Lighten. 
You should now have something that looks like this.

 Open your second close up tube.
Move it under the left black rectangle. If you are using the same one as me, do a horizontal flip.
Position it so that the face is mostly visible. Do the same as we did above and add the tube into the rectangle. Add the Gaussian blur just like we did before. Change the duplicated blurred layer style to soft light.
Change the original tubes layer style to screen.
Duplicate these two tube layers then link them together. Then highlight all 4 of those layers and duplicate it. Then do horizontal flip and move into the right black rectangle, except move it over more so that the other eye of the tube shows more.
Move all 4 of those layers Under the right black rectangle layer.
CTRL + click on the preview window of the right black rectangle.
CTRL + SHIFT + I (letter eye)
Highlight the first tube layer and do CTRL + X
Keep doing this to the other 3 layers so that all the excess is gone.
Move these 4 layers back on top of the right black rectangle.
Highlight the glitter rectangle layer and change the hue and saturation to your liking. Be sure you do this to both the right and the left ones. 
Open up your full body tube, scale to liking and position to bottom left.
Duplicate and add your Gaussian blur and change the layer style to soft light.
Add your Blueautiful Time text to the top left.
 Add drop shadow to the main parts of the temp, to the full body tube and any elements.
Add your name, copyright and license info. 
 I hope you have enjoyed this tut! Please message me with your results.
 

My Time


Get your own Digital Clock

Networked Blogs

Grab My Blinkie

Photobucket
Photobucket
Contact Me skylerhaylie1431@live.com

I CT for

Addicted 2 Scraps

Followers

Chatter Box

Places I Like

Tut Writers 4 PMTW/S